BLiNX 2 : Masters of Time & Space
Portage natif de BLiNX 2 : Masters of Time & Space pour macOS.
BLiNX 2 Recomp est un portage natif de BLiNX 2 : Masters of Time & Space pour macOS, distribué en binaire dans ses releases.
Architecture
Mac OS X - macOS
64 bits
Jeu d’origine
BLiNX 2 : Masters of Time & Space Xbox
Téléchargement et liens
- Télécharger BLiNX 2 : Masters of Time & Space
- Code source 30 étoiles sur GitHub
Historique des versions
2026.11.2
Changelog complet
Play in your language, bring your saves, and a menu you can read on the Deck. This release also smooths stage 2 at 16:9 and tidies the widescreen HUD.
- Your language. The menu's Game page now offers the six languages BLiNX 2 ships in. Pick one and the game uses it from the next start; English stays the default.
- Bring your saves.
./blinx2 saves import --from PATHbrings saves from a console copy, another install or a zip (the menu's Saves export too) into your game, re-signed for your build. Your current saves are backed up first. See "Bring your saves" in the README. - A menu sized for your screen. On the Steam Deck the menu is now large enough to read, and on a high-DPI desktop it follows your scale. Render scale and shaders no longer change its size, the Size setting applies at once, and taps reach every button at render scale 2 and 3.
- Stage 2 at 16:9 no longer slows down. Widescreen kept the game from merging its draws, so it issued over twice the draws of 4:3; it merges them again, with the same picture.
- Widescreen HUD: the boss health bar and the boss stage's Team block sit at the screen edges at 16:9, and a long health bar no longer splits in two (GitHub #6).
- BLiNX 1 crystals, now named for what they do. The crystals mod is
now "BLiNX 1 crystals" on the Mods page: turn it on to collect crystals
the BLiNX 1 way, in a row of four. Heart crystals now show in the row,
drawn with the heart above your heart gauge, and the hearts above the
gauge light up for them again. Your
mods."crystals.enable"setting andRECOMP_CRYSTALSkeep working. - Bloom on the Mods page. The game's bloom, the project's first
tweak, is now a mod: turn it off or set its strength (0 to 2) from the
menu and see it at once. Your
[fx] glowandglow_intensitysettings and theRECOMP_GLOWkeys keep working as before. - Free camera from the Deck's pad. Hold Back then R3 for 0.4 s to start and stop the free camera where Guide never reaches the game (Steam on the Deck, the Game Bar on Windows), as Back+L3 opens the menu.
- See the stage's collision. A new Collision mod on the Mods page (F4) draws the stage's collision around you in the game itself, coloured by slope, with x-ray and edge options. It is off by default and only for the curious: it changes nothing in play.
- A clear warning for another release. If your dump is another region or revision than the one this port was made from, the wizard says so and asks before building, instead of failing at the very end with no reason.
For developers
- Pins: xboxrecomp-cli v0.21.0 and toolkit blinx2-v0.14.0, up from
v0.20.0 and blinx2-v0.13.0. The bootstrap
blinx2.pyis unchanged. - Keys that waited for the pin:
[xbe] region,versionandtitlerecord the reference release, sofingerprint,doctor, the wizard and the build stamp (release=) name a dump of another release;[saves]describes the save import;[system] languageslists the six languages forsystem.language(RECOMP_SYSTEM_LANGUAGE). v0.20.0 refused all three. - Readable gen names:
[pipeline] symbolspoints analyze atconfig/symbols.toml, so 196 gen functions carry their reverse- engineered names. Gen is otherwise identical to a stock regen. - Mod API 8: a 3D debug draw (
draw3d_*) over the frame at the flip, on D3D11 and Metal; the collision mod is its first user. The CPU backend draws nothing yet. - Texture dumps for packs:
RECOMP_DEBUG=tex_dump=writes each texture once by the hash the pack loader looks up; the texture inventory inanalysis/sizes the upscale work. - Toolkit groundwork, off by default: the in-window game reset's stop
probe, statics scan and guest unwind (openspec
game-reset), and deterministic mode stepping its clock only at frame-wait loops (about 32 flips per virtual second, up from 8). .gitattributes: JSON stays LF on Windows checkouts, so acore.autocrlf=trueclone never rewriteshook_functions.json.
2026.11.1
Changelog complet
The Windows build wizard works again, and your saves can travel. 2026.11.0's wizard stopped partway on many Windows PCs; this patch fixes it and brings a mouse-friendly menu along.
- Windows wizard fixed. Builds on a stock Windows PC finish again: no
more
UnicodeEncodeErrorin the hook scan, no more refusal ofshaders/param-kinds.toml, and Retry works after a failed step. - Move your saves. The menu's new Saves page exports your saves to a zip and imports one on another PC. Your current saves are backed up first, and the game closes so its next start loads the imported ones.
- Share your settings. The Files page exports your settings or a shader profile and imports one back, with a file browser in the menu.
- The menu takes the mouse. Hover, click, drag sliders and scroll; an on-screen keyboard pops up for renames on a touch screen.
- A tidier menu. Compact and expanded sizes (R3), a toolbar that folds to icons and button glyphs in the footer.
- Free camera, easier to fly. A small indicator and a controls reminder while you fly, bindings drawn as the buttons and keys you press, mouse buttons for fly controls and one row to reset them.
- Fixed: at 16:9 the lit heart crystals now move with the health panel instead of floating at their 4:3 spot.
For developers
- Pins: xboxrecomp-cli v0.20.0 and toolkit blinx2-v0.13.0, up from
v0.19.0 and blinx2-v0.12.0. The CLI writes every text file as UTF-8,
clones the toolkit with
core.autocrlf=falseand heals an older CRLF clone; the toolkit's.gitattributeskeeps packaged text LF. The bootstrapblinx2.pyis the CLI's refreshed template. - Why a patch release: the fix lives in the CLI and the toolkit, and the wizard runs the pinned CLI, so the pins had to move before players could build again. The menu and mod changes already on the toolkit come along rather than being held back.
- Collision class names:
[[extract.collision_class]]rows name BLiNX 2's collision classes inblinx2 extract --collision, so the Godot scene lists them by name. v0.19.0 refused the key, so the table waited for this pin. - Mod API 7:
glyph_name, the{ctl:}token and a per-mod status panel; the free camera's flight panel uses them. Off with the camera, so goldens draw nothing. - Deterministic mode (
RECOMP_DEBUG=deterministic, off): a virtual clock, a fixed thread order and pad records on the title's poll clock, so a pad replay repeats state hash for state hash on one host. It is a debugging tool; stock runs read the clock as before. - Frame dumps as PNG:
blinx2 frames compactkeeps dumps lossless at a fraction of the BMP size, and the shot tools read both.
2026.11.0
Changelog complet
A widescreen HUD, sharper CRT shaders and a handful of new mods. Everything new is off until you turn it on, except the HUD at the screen edges, and that one changes nothing at 4:3.
- Widescreen HUD. At 16:9, 16:10 or 21:9 the HUD moves out to the edges: panel, Time and radar on the left; TS, the item counter, the goal message and the REW/PAUSE legend on the right. On by default; HUD at the screen edges on the Mods page turns it off, live.
- The title movie fills a wide screen. It crops to the width instead
of sitting in black bars (
display.moviebrings backblackorfit). - CRT shaders fixed at high scales. The shader picture sits in the game's frame, and the scanlines no longer band at render scale 2 or 3.
- Shader profiles. Chain up to 8 shaders, tune them, save them by name on the Shaders page and switch between them. On/off effects are toggles now, not sliders.
- A friendlier menu. Changed rows are marked, Save and Revert work from any page, leaving with unsaved changes asks first, and the selected row explains itself in the footer.
- Free camera on the Mods page. Turn it on, set speed, mouse sensitivity, invert and fast/slow, and rebind its controls there. Guide+Y starts it on a pad.
- New mods, all off until you pick them:
- Enemies: spawn a copy of the nearest enemy, defeat the nearest one, or give enemies up to 10 times the hp.
- Crystal sets: BLiNX 1's rules, where a row of crystals grants a time control (Sweepers stages).
- Shop: change shop prices and gun power, speed and ammo. Never saved; off puts them back.
- Debug menu: opens the game's own debug menu and stage select from the title screen.
- The real audio DSP, on by default. The game's own reverb, effect
sends and mix, instead of a plain stereo fold.
RECOMP_APU_DSP=0inconfig/launch.envbrings the old sound back. - Less disk wear. The cache partition lives in memory (up to the
console's 750 MB) instead of being rewritten on your disk.
ram_cache = falseunder[storage]puts it back on the disk. - Fixed: rewinding no longer loops when the cache partition is full.
- Heads-up: the free camera's default keys moved: End freezes the
world and Home resets the camera (were F8 and F5). The old
free_*_keylines in yourconfig.tomlstill work.
For developers
- Pins: xboxrecomp-cli v0.19.0 and toolkit blinx2-v0.12.0, up from
v0.16.0 and blinx2-v0.9.0. The toolkit adds the HUD anchor layer with
its
fullstretch key, mod API v4 to v6 (hooks on recompiled functions,guest_call,guest_alloc), shader profiles, the menu's Save and Revert, and the lifter's 8- and 16-bitmul/div(19 sites in gen change). - Why the HUD mod is on by default: it is the one exception to
default-off among the mods. At 4:3 it returns before any table lookup,
so stock frames are untouched, and wide-screen players should not have
to find a switch to see their HUD. The table keys 201 call sites in 18
groups; each moved draw is restored byte for byte after it. Goldens run
with
mods=none. - Why
display.movie = "fill": at 16:9 a cropped title movie looks better than a stretched or pillarboxed one. It does nothing at 4:3. - Regenerate gen: the HUD, entities, shop and walls mods add hook
slots (
config/hook_functions.json), so a build tree needsblinx2 analyzethenblinx2 recomp. - Mod APIs: the entity API (
src/ent_api.h: list, spawn, kill and hp scale for class-1 enemies, run on the guest thread throughguest_call) and the shop and weapon API (catalogue, story-shop price lists, weapon stats) give mods typed access instead of raw guest memory. - Walls (experimental, off): a
wallsmod keeps the near face when the player sits inside a wall thinner than its own diameter, where the game's single best contact can push it through. That clip happens on original hardware too and may matter to speedruns, so it stays opt-in. - Gamepads on by default on every host, macOS included; only an
input script or
RECOMP_HOST_PAD=0keeps them out. Packaged builds already had them on. - Per-title hard disk: dev runs without
RECOMP_HDD_DIRnow use/xboxrecomp/, copying old saves once from the shared root. Installed builds are unchanged. - Pad scripts and recordings (
RECOMP_PAD_SCRIPT,pad_record) now drive BLiNX 2, which polls its pads itself, and recordings can anchor to file opens so a longer load no longer drifts the presses. - Symbol map and extraction:
config/symbols.tomlgathers the functions, globals and fields named so far, each with its source, and imports into Ghidra; feeding it into gen through the CLI's[pipeline] symbolscomes later.blinx2 extractturns the owner's stages into a local Godot project, with floor reflections, mirrored skies and additive glows; nothing it writes is shared. - Extract keys:
[extract]ingame.tomlgains the stages' collision trees (M64 has none), the placement sets with per-stage layers, and 168 placement models with the collectible set, forblinx2 extract --collisionand--placements. - Why the DSP is on: it is the faithful path; the stub skipped the
game's effects mix. The default moved into the toolkit
(
XBOXRECOMP_APU_DSPON where a dsp56300 archive exists), and a tree's own OFF stays OFF.
2026.10.4
Changelog complet
CRT shaders, an in-game menu and a lighter Steam Deck. Everything new is off until you turn it on, except the menu, and the menu only shows when you open it.
- CRT looks. Shadow mask, scanlines and a gentle curve on the final
picture:
crt-lottes,crt-lottes-fast,crt-hyllian, or AMD'sfsrupscaler. Metal and Direct3D 11, with nothing extra to install on Windows. - A Shaders page. Pick a shader in the menu and tune its curvature, mask, scanlines and bloom live, with a Reset to preset. Save keeps only what you changed. The page shows only where this system can run the shaders.
- An in-game menu, on by default. F10, Guide+A or Back+L3 held for a moment (and an Elite's P1 on macOS) opens it over the game: change the options while you play, rebind the host actions, turn mods on or off. On a Steam Deck, SteamOS keeps Guide+A: use Back+L3, or bind R4 to F10 once in Steam Input.
- A stats strip. F3 shows fps, frame time, pacing, scale and backend in the corner.
- Lighter on the Steam Deck. A heavy frame's draw work went from about 18.5 to 14.4 ms.
- Render scale switches at once. Textures stay loaded when you change the scale, on Metal and Direct3D 11.
- Clean 2D at high scales. "2D on guest grid" (
render.snap_2d, on the menu's Render page) removes the seams in loading screens and HUD tiles at scale 2 and up. - Character detail mod. On the Mods page: characters keep their detailed models further away, following the render scale.
- Borderless fullscreen on macOS. No separate Space, and Cmd-Tab away and back just works.
- The far sea fills widescreen. The distant sea now reaches the edges at 16:9 and wider.
- Nintendo pads by position. On macOS and Linux, Switch Pro and GameCube pads map like an Xbox pad: the right face button is B whatever its label says. Windows is unchanged.
- Heads-up: if you edited
[input.bindings]or[input.actions]inconfig/config.toml, some names changed. See below.
Breaking: new names for controls and keys
The game now uses upstream xboxrecomp's names in [input.bindings] and
[input.actions]. The old names are not read any more: rewrite your own
lines with the table below (config.default.toml is updated for you).
Until you do, each old name logs an unknown control, unknown input or
unknown name line, and:
- an old control name (
ltrigger = ...) is ignored, and that control keeps its default; - an old key name is skipped but the rest of the line still applies, so a
line left with no valid entries unbinds that control
(
start = "KPEnter"leaves Start with no key); - an action line such as
menu.openkeeps only its valid entries.
| Old | New |
|---|---|
ltrigger rtrigger |
left_trigger right_trigger |
lthumb rthumb |
left_thumb right_thumb |
lstick_up lstick_down lstick_left lstick_right |
left_stick_up left_stick_down left_stick_left left_stick_right |
rstick_up rstick_down rstick_left rstick_right |
right_stick_up right_stick_down right_stick_left right_stick_right |
back+lthumb@400 (the menu chord) |
back+left_thumb@400 |
KP0 .. KP9 |
Numpad0 .. Numpad9 |
KPEnter KPPlus KPMinus |
NumpadEnter NumpadAdd NumpadSubtract |
KPMultiply KPDivide KPPeriod |
NumpadMultiply NumpadDivide NumpadDecimal |
LBracket RBracket |
LeftBracket RightBracket |
MouseLeft MouseRight MouseMiddle |
Mouse1 Mouse2 Mouse3 |
Every other name works as before (Return, Esc, Mouse4, WheelUp
...), and Pause, CapsLock and Control are new. RECOMP_TRACE=key
prints each key by its new name ([KEY] down enter). The full list is in
docs/input.md.
For developers
- Pins: xboxrecomp-cli v0.16.0 and toolkit blinx2-v0.9.0, up from v0.10.1 and blinx2-v0.6.0. The toolkit now carries upstream xboxrecomp v0.15.0 and v0.16.0, and the POSIX hosts link SDL3 instead of SDL2.
- Why the menu is on by default: closed, it draws nothing and takes no
input but the Guide+A and Back+L3 chords, and players should find F10
without editing a file. A Deck A/B at stage 1 read 30.00 flips/s with it
on and 29.99 off.
enabled = falseunder[menu]turns it off; the goldens run withRECOMP_MENU=0. Every other new option stays off by default. - Why the rename breaks old configs: one vocabulary with upstream means every game on the toolkit reads the same file the same way. An old name is refused and named in the log, never guessed at.
- Shaders:
present.shader(RECOMP_PRESENT_SHADER, defaultnone) runs a RetroArch slang preset through librashader v0.12.0 at present. The library is fetched at build time, pinned by sha256, and loaded at run time, never linked: without it the game logs one line and looks stock. On x86-64 Windows it is the toolkit's own D3D11-only build of the unmodified v0.12.0 source, which imports only system DLLs, so it runs on a stock Windows 11 without D3DX9 or the Visual C++ runtime. The CPU renderer ignores it. - Licences: every package carries the full third-party notices. The
Windows exe's MinGW-w64 and llvm-mingw runtime terms are in
LICENSES/with aNOTICEnaming what each one links; the macOS app ships each bundled dylib's licence inResources/LICENSESwithBUNDLED-LIBRARIES.md; librashader's MPL-2.0 text and crate notices sit inshaders/. - Shader parameters: the Shaders page reads each preset's
#pragma parametertable and sets values live on Metal and D3D11. Overrides live in[present.shader_params.]as=, andRECOMP_MODS_DESCRIBE=jsonlists every bundled preset's parameters. My wrapper presets calm the curvature (crt-lotteswarpX0.031 to 0.01,warpY0.041 to 0.02; crt-lottes-fastCURVATURE0.02 to 0.01); the vendored upstream files are untouched. - No fringing under gamescope: with a shader running, the present surface is the output, not the 640x480 frame, so gamescope no longer rescales the mask and scanlines by a non-integer factor.
- Deck draw cost: D3D11 skips unchanged vertex constants and
output-merger state, and the pushbuffer decode and per-batch setup are
memoised within a flip (Metal gets the constant-upload skip too).
RECOMP_D3D11_MEMO=0turns the skips off for A/B runs. - Audio: the stub fix promised in v2026.10.3 ships: the stub re-arms
its interrupt only when the sequencer is switched off, so the game's
audio recovery runs once per boot, not about 23 times a second. The
emulated audio DSP (MIT dsp56300 JIT) is now compiled into every build,
but the stub stays the run-time default until the DSP shows no frame-rate
cost;
RECOMP_APU_DSP=1turns it on. - cpuid: the game sets
RECOMP_CPUID_NO_SIMD=1by default again. The v0.16 toolkit reports MMX and SSE in cpuid, and the game's MMX JPEG decoder has not been checked lifted yet;RECOMP_CPUID_NO_SIMD=0reports them.
2026.10.3
Changelog complet
Updating works again. If v2026.10.2 failed to build when you updated an older install, run this release's wizard and choose Update.
- Updates that build. The wizard now moves the toolkit to this release's version before it builds, so an update no longer compiles against old code.
- Clearer build errors. When a build fails, the wizard shows the compiler's error lines first, not just the end of the log.
- Widescreen and free camera, documented. The README now has sections
and screenshots for
[display] aspect(Hor+ 16:9, 16:10, 21:9) and the free camera (F6), plus the new options in the settings table.
For developers
- Pins: xboxrecomp-cli v0.10.1 and toolkit blinx2-v0.6.0 (unchanged), so the game runs the same code as v2026.10.2.
- Why updates broke: setup only checked that a toolkit clone existed.
An update moved the
[toolkit]pin but kept the clone at the first setup's tag. The CLI now marks the clones it makes and moves a marked clone to the pin (a developer's own checkout is left alone), anddoctorreports a clone that is off its pin. - New release gate:
scripts/release_build_check.pybuilds a clone of the previous release, updates it in place and packages it, the path that broke. It reproduces the v2026.10.1 → v2026.10.2 failure, anddocs/packaging.mdruns it before every tag. - Coming next, already merged in my toolkit:
- Audio stub fix. The stub that stands in for the audio DSP re-armed its interrupt on every recovery, so the game ran its audio recovery about 23 times a second. It now runs once per boot. It ships in the next toolkit release.
- An emulated audio DSP, opt-in at build time and at run time. The stub has no DSP, so games lose reverb and 3D effects, surround is folded to stereo, and Burnout 3's menu music is silent. The real programs now run on the MCPX's two DSPs through the MIT-licensed dsp56300 JIT. It stays opt-in until the goldens and the Deck and Windows numbers show it costs no frame rate. Licence rule: permissive or LGPL code only, no GPL, so the glue is written from hardware facts, not from xemu's GPL files.
- Groundwork for a native Linux build (x86-64 MMIO handling). The plan: native by default on SteamOS with Proton as the opt-in, after the move to SDL3.
2026.10.2
Changelog complet
Widescreen, a free camera and a friendlier build wizard. Built with
xboxrecomp-cli v0.10.0 and the toolkit at blinx2-v0.6.0. Every new option
is off by default, so the game looks and plays as before until you turn
one on in config.toml.
Added
- Hor+ widescreen on Metal and Direct3D 11:
[display] aspect = "16:9"(or"16:10","21:9") shows more of the world at the sides instead of stretching it. The HUD keeps its 4:3 layout, andmoviechooses how the cutscene movies fill the wider frame ("black","fit","fill"). - A free camera:
[camera] free = "on", then F6 starts and stops it. Fly with the pad or the mouse while BLiNX stands still; F8 stops and restarts the world, F7 shows or hides the HUD and F5 goes back to the game's camera. The keys and speeds are inconfig.default.toml. [display] overscancrops the edges of the picture, as a TV did, for games that leave a border there. 0 (the default) shows the whole frame.- The build wizard can build for several platforms in one go, and its Welcome page, Fresh and Update choices and error messages are clearer.
Fixed
- Audio under Proton (Steam Deck, Linux) has a deeper buffer, which removes the occasional crackle when the game is idle.
- macOS: events the game sets and resets in quick succession now wake every thread waiting on them, as on Windows.
2026.10.1
Updates are now patches: from this release on, the build wizard rebuilds only what changed and installs it over your current version, instead of downloading and building the whole game again. Built with xboxrecomp-cli v0.8.0 and the toolkit at blinx2-v0.5.1.
Added
- Incremental builds and patch installers. Rebuilding gives the same files byte for byte, so an update ships only the files that differ from your installed version. A 2026.10.0 install can take this release as its first patch; on Windows, the first update moves the install to the new versioned layout and may be a full install once.
docs/frame-generation.md: how to get a 60 fps look with outside frame-generation tools (Lossless Scaling, lsfg-vk) while the game itself runs at its stock 30 fps.
Fixed
- Direct3D 11 and Metal: texture-shader clip planes now cut what they should, as the software renderer already did. No BLiNX 2 scene seen so far uses them, so nothing in the game is expected to look different.
Known issues
- The game crashed once in stage 5-1 on macOS, after about 90 seconds; it has not happened again in later runs and is still being watched.
2026.10.0
Changelog complet
The first stable release. It builds and installs the game from your own disc image with the build wizard for Windows, macOS and Linux (Steam Deck included), and fixes what the release candidates left open. Built with xboxrecomp-cli v0.7.7 and the toolkit at blinx2-v0.5.0.
Added
- Anisotropic filtering:
anisounder[render]inconfig/config.toml(2 to 16; 0, the stock look, by default) sharpens ground and walls at a distance, on Direct3D 11 and Metal.
Fixed
- The game no longer freezes after the Tom Tom Gang rank exam.
- macOS: the game no longer crashes when started from the Finder, including the first boot with no saves.
- Steam Deck: controllers work again. The Proton release the bundle used started no controller driver, so the game saw no pads; the Deck build now uses GE-Proton11-7, which updating downloads once.
- Steam Deck: a second launch while the game is starting says so instead of starting it twice, and the "Checking the Steam Linux Runtime" notice shows only once.
- Controllers: a pad connected after launch on macOS and Linux is picked up, and a replugged pad takes its old port back. A controller on a second slot (Steam Deck Desktop Mode) now reaches player 1.
- The stage 1 ocean and the Boss 3 ripple draw their bump-mapped surfaces instead of a plain texture. The Direct3D 11 side is by @hgeorgilas.
- The characters on the Story Mode menu no longer go missing.
- Sound: a voice the game is still updating no longer plays as a short burst, and a wide ADPCM block no longer overruns the decoder. Both fixes build on Matt Graham's (@MattSG) voice processor work in upstream xboxrecomp (#217); he co-authors them.
- The game's cache files no longer share a folder with the hard disk's cache partitions, where they could collide.
Known issues
- The game crashed once in stage 5-1 on macOS, after about 90 seconds; it has not happened again in later runs and is still being watched.
2026.10.0-rc.2
Added
- The wizard's Building page lists each part of the build in order, with its own progress, time and log, and shows that the build is still working during the long, quiet recompile step.
- You choose where the finished build goes; by default it is a folder beside the wizard, not hidden in your user data.
- When a build fails, the wizard shows which step failed, an excerpt of its log and the folder with the full logs.
- Credits for this project, the tools it is built with and the
third-party software, with their licences in
NOTICES.txt. - The wizard has a gamepad icon on every platform.
Changed
- The font hint for the sharper HUD appears only when the font is missing, with a link to get it.
- Stopping a build asks first and says what a new run will reuse.
- Releases carry these notes, and release candidates are marked as pre-releases.
- Built with xboxrecomp-cli v0.7.5 and the toolkit at blinx2-v0.3.1 (unchanged).
Fixed
- The build wizard now builds on Windows. In rc.1 a Windows build stopped while packaging; the setup program's disk space estimate also left out the game files.
Réagir sur le forum
Une question, un retour d’expérience ? Ouvrez la discussion sur le forum.