Dino Crisis 2

Port 0.1.4

Portage natif de Dino Crisis 2 pour macOS.

Dino Crisis 2 Recompiled est un portage natif de Dino Crisis 2 pour macOS, distribué en binaire dans ses releases.

Architecture

Mac OS X - macOS Mac OS X - macOS Apple Silicon Apple Silicon 64-bit 64-bit

Original game

Dino Crisis 2 PlayStation

Download and links

Version history

0.1.4
Dino Crisis 2 0.1.4 moves from psxrecomp pin I 0.1.20 (v0.1.3) to pin I 0.1.23 (psxrecomp 578bd3b, recomp-ui 5302f1f). Nothing else changes in this title's repository. New features These came with 0.1.2 and are part of 0.1.4. If you are updating from an earlier version, they are new to you. Replays: Replay recording is now supported in Dino Crisis 2. Press F12 to start recording during play, then F12 again to stop and save in an available replay slot. Recording needs at least one free replay slot. If every slot is occupied, the game shows “No free replay slots”. Open the save states menu with F7, then press Tab to switch between Save States and Replays. Select a recording and press Enter to play it, F2 to rename it, Delete to remove it or E to export it. Replays record your inputs rather than video, so you can share them as lightweight files with someone using the same version of the game. Compatibility with different versions is not guaranteed. Differences in the game build, disc, BIOS or replay settings can affect playback. Press a gameplay control to stop a replay and take control at that point. When a replay finishes, the game continues from its recorded endpoint under your…
Full changelog

Dino Crisis 2 0.1.4 moves from psxrecomp pin I 0.1.20 (v0.1.3) to pin I 0.1.23 (psxrecomp 578bd3b, recomp-ui 5302f1f). Nothing else changes in this title's repository.

New features

These came with 0.1.2 and are part of 0.1.4. If you are updating from an earlier version, they are new to you.

Replays: Replay recording is now supported in Dino Crisis 2. Press F12 to start recording during play, then F12 again to stop and save in an available replay slot.

Recording needs at least one free replay slot. If every slot is occupied, the game shows “No free replay slots”. Open the save states menu with F7, then press Tab to switch between Save States and Replays. Select a recording and press Enter to play it, F2 to rename it, Delete to remove it or E to export it.

Replays record your inputs rather than video, so you can share them as lightweight files with someone using the same version of the game. Compatibility with different versions is not guaranteed. Differences in the game build, disc, BIOS or replay settings can affect playback.

Press a gameplay control to stop a replay and take control at that point. When a replay finishes, the game continues from its recorded endpoint under your control.

You can record during play or from boot. To record from boot, tick “Record replay” in the GUI launcher before starting the game. F12 stops and saves this recording too. F12 and F7 are the default shortcuts and can be rebound; F11 toggles fullscreen.

To keep replay timing repeatable, both recording and playback use interpreter mode instead of native compiled execution. This can reduce performance, especially on weaker systems.

Recording currently supports a single Player 1 pad. PS1 Mouse, neGcon, GunCon, multitap and netplay recording are not supported.

Keyboard profiles: Save named keyboard profiles and reuse them across sessions. Use Save as, Load, Rename and Delete to manage your profiles. The Default profile stays protected.

Dual key bindings: Assign up to two keyboard keys to each action. Right-click a binding to clear it. Duplicate assignments stay visible and are highlighted so you can resolve conflicts.

PS1 Mouse, neGcon and GunCon: These controller types can be selected for games that support them. Whether Dino Crisis 2 uses one of them was not tested.

Launcher improvements: Each configured player gets a separate controls tab. The launcher remembers downloaded cover art and lets you choose a replay as a startup option.

Portable paths: Portable packages can retain local disc, BIOS and save paths when you move the game folder. Move the whole installation, including its configured local files.

Movies fill the picture: A 24-bit movie frame is shown at its own height, so the black bars above and below a movie are gone. Setting: Display, "Crop movies to the picture". From 0.1.4 it is off by default (see Changes).

Save-state compatibility: Make an in-game save before updating, and keep a backup of your old installation and memory cards. Save states from older builds can be incompatible with this update.

Changes

  • Two of the game's graphics transfers (DMA) are handled as the PlayStation does; before, some menus could be drawn over the previous frames.
  • OpenGL renderer: more exact triangle edges and one-pixel strips, closer to the software renderer.
  • Interlaced (480i) screens: the field on display is no longer drawn over.
  • Movies are shown uncropped by default.
  • In-game menu: Restart game (a cold boot of the disc), the look rows (renderer and picture options), window size, volume, controller 1 port and disc reinsert.
  • New Advanced setting, GPU drawing time (Settings > Advanced), off by default. It times the GPU's drawing as the PlayStation does; only a few games need it.

What to do. Download 0.1.4 and run setup again with the same disc and BIOS.

Tested. Packages for Windows x64, Linux x64, macOS Apple Silicon and macOS Intel. All four passed the CI build and the release package gate (archive audit and native generator start); on macOS the gate's rule against Homebrew libraries was waived (see Known issues). On Windows, a build of this title on pin I 0.1.23 played every recorded route of Dino Crisis 2 to its end, without a crash. That check compares memory, not the picture, and is not a play test. No setup run and no play test was made from these exact packages. Report any problem in the issues. This release does not claim gameplay quality.

Known issues.

  • macOS: the setup program is linked to three Homebrew libraries (openssl, freetype, harfbuzz) and does not start on a Mac without them. The release package gate has a rule against this; it was waived for this release.
  • Linux and macOS: setup needs Python 3.10 or newer.

More games. Every released port is listed at https://alexbeavs-ps1-ports.github.io/psxrecomp-ports/. When a new wave is released, its games are added there.

Source: 09e097f86aff11e80abd92204c6a96d98abf4692. Check downloads against SHA256SUMS.txt; RELEASE-MANIFEST.json records the exact archives and build provenance.

0.1.3
Dino Crisis 2 0.1.3 moves from psxrecomp pin I 0.1.19 to pin I 0.1.20. The new pin carries two picture fixes in the shared runtime. Nothing else changes from v0.1.2. Changes OpenGL renderer above 1x render scale: some games draw a column as one triangle whose short side is one pixel wide. The renderer now fills the whole column, as the PlayStation does; before, it could show thin vertical stripes. Found in Duke Nukem - Total Meltdown. Native (1x) output does not change. Movies shown in 24-bit colour now stay 24-bit when the game moves them inside video memory. Before, such movies could flicker. Found in The X-Files. What to do. Download 0.1.3 and run setup again with the same disc and BIOS. Tested. Packages for Windows x64, Linux x64, macOS Apple Silicon and macOS Intel. All four passed the CI build and the release package gate (archive audit and native generator start); on macOS the gate's rule against Homebrew libraries was waived (see Known issues). On Windows, a build of this title on pin I 0.1.20 played a recorded boot route from an earlier release to its end, without a crash. That check compares memory, not the picture, and is not a play test. The two fixes were measured in…
Full changelog

Dino Crisis 2 0.1.3 moves from psxrecomp pin I 0.1.19 to pin I 0.1.20. The new pin carries two picture fixes in the shared runtime. Nothing else changes from v0.1.2.

Changes

  • OpenGL renderer above 1x render scale: some games draw a column as one triangle whose short side is one pixel wide. The renderer now fills the whole column, as the PlayStation does; before, it could show thin vertical stripes. Found in Duke Nukem - Total Meltdown. Native (1x) output does not change.
  • Movies shown in 24-bit colour now stay 24-bit when the game moves them inside video memory. Before, such movies could flicker. Found in The X-Files.

What to do. Download 0.1.3 and run setup again with the same disc and BIOS.

Tested. Packages for Windows x64, Linux x64, macOS Apple Silicon and macOS Intel. All four passed the CI build and the release package gate (archive audit and native generator start); on macOS the gate's rule against Homebrew libraries was waived (see Known issues). On Windows, a build of this title on pin I 0.1.20 played a recorded boot route from an earlier release to its end, without a crash. That check compares memory, not the picture, and is not a play test. The two fixes were measured in the games named above, not in Dino Crisis 2. No setup run and no play test was made from these exact packages. Report any problem in the issues. This release does not claim gameplay quality.

Known issues.

  • macOS: the setup program is linked to three Homebrew libraries (openssl, freetype, harfbuzz) and does not start on a Mac without them. The release package gate has a rule against this; it was waived for this release.
  • Linux and macOS: setup needs Python 3.10 or newer.

Source: 329574ec89f046ec33a2a98af30beeefd0dec071. Check downloads against SHA256SUMS.txt; RELEASE-MANIFEST.json records the exact archives and build provenance.

0.1.2
This update brings Dino Crisis 2 onto the newer shared framework and launcher. Dino Crisis 2 0.1.2 is built on psxrecomp pin I 0.1.19 with the refreshed in-game menu. New features Replays: Replay recording is now supported in Dino Crisis 2. Press F12 to start recording during play, then F12 again to stop and save in an available replay slot. Recording needs at least one free replay slot. If every slot is occupied, the game shows “No free replay slots”. Open the save states menu with F7, then press Tab to switch between Save States and Replays. Select a recording and press Enter to play it, F2 to rename it, Delete to remove it or E to export it. Replays record your inputs rather than video, so you can share them as lightweight files with someone using the same version of the game. Compatibility with different versions is not guaranteed. Differences in the game build, disc, BIOS or replay settings can affect playback. Press a gameplay control to stop a replay and take control at that point. When a replay finishes, the game continues from its recorded endpoint under your control. You can record during play or from boot. To record from boot, tick “Record replay” in the GUI launcher…
Full changelog

This update brings Dino Crisis 2 onto the newer shared framework and launcher. Dino Crisis 2 0.1.2 is built on psxrecomp pin I 0.1.19 with the refreshed in-game menu.

New features

Replays: Replay recording is now supported in Dino Crisis 2. Press F12 to start recording during play, then F12 again to stop and save in an available replay slot.

Recording needs at least one free replay slot. If every slot is occupied, the game shows “No free replay slots”. Open the save states menu with F7, then press Tab to switch between Save States and Replays. Select a recording and press Enter to play it, F2 to rename it, Delete to remove it or E to export it.

Replays record your inputs rather than video, so you can share them as lightweight files with someone using the same version of the game. Compatibility with different versions is not guaranteed. Differences in the game build, disc, BIOS or replay settings can affect playback.

Press a gameplay control to stop a replay and take control at that point. When a replay finishes, the game continues from its recorded endpoint under your control.

You can record during play or from boot. To record from boot, tick “Record replay” in the GUI launcher before starting the game. F12 stops and saves this recording too. F12 and F7 are the default shortcuts and can be rebound; F11 toggles fullscreen.

To keep replay timing repeatable, both recording and playback use interpreter mode instead of native compiled execution. This can reduce performance, especially on weaker systems.

Recording currently supports a single Player 1 pad. PS1 Mouse, neGcon, GunCon, multitap and netplay recording are not supported.

Keyboard profiles: Save named keyboard profiles and reuse them across sessions. Use Save as, Load, Rename and Delete to manage your profiles. The Default profile stays protected.

Dual key bindings: Assign up to two keyboard keys to each action. Right-click a binding to clear it. Duplicate assignments stay visible and are highlighted so you can resolve conflicts.

PS1 Mouse, neGcon and GunCon: These controller types can be selected for games that support them. Whether Dino Crisis 2 uses one of them was not tested.

Launcher improvements: Each configured player gets a separate controls tab. The launcher remembers downloaded cover art and lets you choose a replay as a startup option.

Portable paths: Portable packages can retain local disc, BIOS and save paths when you move the game folder. Move the whole installation, including its configured local files.

Movies fill the picture: A 24-bit movie frame is shown at its own height, so the black bars above and below a movie are gone. Setting: Display, "Crop movies to the picture", on by default.

Save-state compatibility: Make an in-game save before updating, and keep a backup of your old installation and memory cards. Save states from older builds can be incompatible with this update.

Other changes

  • The recompiler, the runtime and the in-game menu move from the framework of v0.1.1 (2026-09-15) to pin I 0.1.19 (psxrecomp 7192402, recomp-ui 14799da). Runtime changes repair several paths that fell back to slower interpreted execution.
  • Linux: on a machine without the program make (a Steam Deck), setup keeps its overlay toolchain and compiles overlay code with the compiler the build already uses. Before, that code ran interpreted, which is slower.
  • macOS: setup compiles the recompiler with Apple clang 15 (macOS 13).
  • The package now also contains OpenBIOS, a free replacement BIOS. Setup still asks for your own PlayStation BIOS.

What to do. Download 0.1.2 and run setup again with the same disc and BIOS.

Tested. Packages for Windows x64, Linux x64, macOS Apple Silicon and macOS Intel. All four passed the CI build and the release package gate (archive audit and native generator start); on macOS the gate's rule against Homebrew libraries was waived (see Known issues). On Windows, a build of this title on pin I 0.1.18 (the same runtime; 0.1.19 changes only tests and the macOS setup script) played a recorded boot route from the earlier release to its end, without a crash. That check compares memory, not the picture, and is not a play test. No setup run and no play test was made from these exact packages. The features above were not each tested in Dino Crisis 2. Report any problem in the issues. This release does not claim gameplay quality.

Known issues.

  • macOS: the setup program is linked to three Homebrew libraries (openssl, freetype, harfbuzz) and does not start on a Mac without them. The release package gate has a rule against this; it was waived for this release.
  • Linux and macOS: setup needs Python 3.10 or newer.

Source: 4309a5533ab70a98f81ba0774d59d82c6f8f30e9. Check downloads against SHA256SUMS.txt; RELEASE-MANIFEST.json records the exact archives and build provenance.

Reply on the forum

A question or a hands-on report? Open the discussion on the forum.

Reply on the forum